NewBody & lights
Geely Coolray (SX11) – right bumper grille
We rebuilt the right front bumper grille by the fog light: a 3D scan, model clean-up and a new 3D-printed part.
1
1 / 3
Motorcycles
Honda CB650R – heated grip button
Heated grip button housing for the Honda CB650R motorcycle. A white insert lets the indicator light through, so you can see when the heating is on.
Specifications
| Compatible with | Honda CB650R motorcycle, heated grips |
|---|---|
| Parts included | Housing with button and white light-transmitting insert |
| What it does | The heating indicator shows through the insert |
| How it is made | 3D model from the customer's measurements, preview for approval, 3D printed |
| Reorder | Kept on file – a copy can be ordered without new modelling |
What we did
- CAD reconstruction
- Final part
- For
- Honda CB650R
- Category
- Automotive
The 3D model is ready to print
We modelled this part from scratch from the customer’s sample. The model stays with us, so a copy can be printed at any time – without the modelling stage, which makes it faster and cheaper than a new job. If needed, we adapt the dimensions or the material.
Order a copy →We reply within 24 h. Send photos and sizes – we tell you for free if it can be done.
How we did it
-
CAD / reverse engineering
An exact 3D model from the client's measurements and a render for approval before printing.
-
Final printed part
The printed housing with a button and a light-transmitting insert.
Similar projects
All projects →New
NewBody & lights
Geely Coolray (SX11) – parking sensor bracket
We made the front parking sensor bracket: a 3D scan of the original part, a prepared model and a new print that matches the mounting dimensions.
0
NewBody & lights
Lexus RX / Toyota Harrier – front air deflector
Fitted in front of the front wheel, it guides the airflow and keeps off spray and dirt. We rebuilt the damaged part with 3D modelling and 3D printing.
0
NewCameras & car electronics
Renault – Extended Grip unit housing (CAN bus)
A new housing (V2) for the Extended Grip unit on a Renault, connected to the CAN bus. It follows the original wiring, so the install looks neat.
8
