NewBody & lights
Geely Coolray (SX11) – right bumper grille
We rebuilt the right front bumper grille by the fog light: a 3D scan, model clean-up and a new 3D-printed part.
1
Home CAD modelling
Service
CAD modelling
We model the part in CAD from a sample, sketch or measurements – an accurate model with the right dimensions, ready for printing or production.
When it helps
- The part broke and can no longer be bought
- You only have a sketch, a drawing or a few measurements
- You want to change an existing part – stronger, a different hole, a different shape
- You need a STEP file for another manufacturer or for CNC machining
How we work
- You send the part or sketchwith photos and the main dimensions
- We measurewith calipers or by 3D scanning
- We modelthe part in CAD, with fitting tolerances
- We checkprint a test piece and adjust if needed
What you can get
Editable CAD model (STEP) Print-ready file (STL) The printed part
Projects with CAD modelling
New
NewFurniture & renovation
Snap-fit mini skirting
We designed and printed a mini skirting that hides parts of the door construction. The clip is shaped for the aluminium profile: press it on until it clicks – no glue, no screws. The design follows the profile shape and the right press fit.
2
NewHome appliances
Double gear for a food slicer
We made the double gear for the slicing mechanism of a bread and food slicer: rebuilt the geometry of the original, created a 3D model and printed the replacement.
2
NewBody & lights
Lexus RX / Toyota Harrier – front air deflector
Fitted in front of the front wheel, it guides the airflow and keeps off spray and dirt. We rebuilt the damaged part with 3D modelling and 3D printing.
0
NewBody & lights
Geely Coolray (SX11) – parking sensor bracket
We made the front parking sensor bracket: a 3D scan of the original part, a prepared model and a new print that matches the mounting dimensions.
0
NewCameras & car electronics
Renault – Extended Grip unit housing (CAN bus)
A new housing (V2) for the Extended Grip unit on a Renault, connected to the CAN bus. It follows the original wiring, so the install looks neat.
8
Other engineering work
Roller stamp with your logo
A roller stamp with your own logo: roll it over paper, cardboard or packaging and the logo repeats. Print width – 30 mm.
16
Body & lights
Ford Tourneo Custom – mirror indicator frame
The indicator frame in the side mirror, replacing a broken or damaged factory one. It holds the indicator firmly in place, so the whole mirror does not need replacing. Made to the mirror geometry and the original fixing points.
13
Have a part that needs rebuilding?
Send a request
Send photos from several angles and, if you can, a few dimensions.