NewBody & lights
Geely Coolray (SX11) – right bumper grille
We rebuilt the right front bumper grille by the fog light: a 3D scan, model clean-up and a new 3D-printed part.
1
Car interior
Mercedes-Benz SL (R129) – seat belt guides
Seat belt guides for the Mercedes-Benz SL (R129). The belt runs through the guide and stays in the right position – a replacement for broken or lost originals.
Specifications
| Compatible with | Mercedes-Benz SL (R129) |
|---|---|
| What it does | Guide the seat belt and keep it in the right position |
| Parts included | 2 guides |
| Reason for replacement | Parts are discontinued or take long to find abroad |
| How it is made | Geometry rebuilt from original and damaged parts, 3D printed |
| Reorder | Kept on file – a copy can be ordered without new modelling |
What we did
- CAD reconstruction
- Final part
- For
- Mercedes-Benz SL (R129)
- Category
- Automotive
The 3D model is ready to print
We modelled this part from scratch from the customer’s sample. The model stays with us, so a copy can be printed at any time – without the modelling stage, which makes it faster and cheaper than a new job. If needed, we adapt the dimensions or the material.
Order a copy →We reply within 24 h. Send photos and sizes – we tell you for free if it can be done.
How we did it
-
CAD / reverse engineering
We rebuilt the geometry from the original and damaged parts.
-
Final printed part
We made new belt guides, visor covers and pocket mounts.
Similar projects
All projects →New
NewBody & lights
Geely Coolray (SX11) – parking sensor bracket
We made the front parking sensor bracket: a 3D scan of the original part, a prepared model and a new print that matches the mounting dimensions.
0
NewBody & lights
Lexus RX / Toyota Harrier – front air deflector
Fitted in front of the front wheel, it guides the airflow and keeps off spray and dirt. We rebuilt the damaged part with 3D modelling and 3D printing.
0
NewCameras & car electronics
Renault – Extended Grip unit housing (CAN bus)
A new housing (V2) for the Extended Grip unit on a Renault, connected to the CAN bus. It follows the original wiring, so the install looks neat.
8
