NewBody & lights
Geely Coolray (SX11) – right bumper grille
We rebuilt the right front bumper grille by the fog light: a 3D scan, model clean-up and a new 3D-printed part.
1
1 / 4
Car interior
Nissan Juke – gear shift mechanism part
Plastic guide for the Nissan Juke gear shift mechanism, made from the original. It keeps the parts on the right path so the lever shifts without play or jamming.
Specifications
| Compatible with | Nissan Juke |
|---|---|
| What it does | Gear shift mechanism guide – keeps the parts moving without play or jamming |
| Features | Fitting features and working surfaces match the original |
| How it is made | 3D modelled from the original, FDM printed |
| Reorder | Kept on file – a copy can be ordered without new modelling |
What we did
- CAD reconstruction
- Final part
- For
- Nissan Juke
- Category
- Automotive
The 3D model is ready to print
We modelled this part from scratch from the customer’s sample. The model stays with us, so a copy can be printed at any time – without the modelling stage, which makes it faster and cheaper than a new job. If needed, we adapt the dimensions or the material.
Order a copy →We reply within 24 h. Send photos and sizes – we tell you for free if it can be done.
How we did it
-
CAD / reverse engineering
We modelled the part from the original, with exact seats and working surfaces.
Similar projects
All projects →New
NewBody & lights
Geely Coolray (SX11) – parking sensor bracket
We made the front parking sensor bracket: a 3D scan of the original part, a prepared model and a new print that matches the mounting dimensions.
0
NewBody & lights
Lexus RX / Toyota Harrier – front air deflector
Fitted in front of the front wheel, it guides the airflow and keeps off spray and dirt. We rebuilt the damaged part with 3D modelling and 3D printing.
0
NewCameras & car electronics
Renault – Extended Grip unit housing (CAN bus)
A new housing (V2) for the Extended Grip unit on a Renault, connected to the CAN bus. It follows the original wiring, so the install looks neat.
8
