NewBody & lights
Geely Coolray (SX11) – right bumper grille
We rebuilt the right front bumper grille by the fog light: a 3D scan, model clean-up and a new 3D-printed part.
1
1 / 5
Cameras & car electronics
Renault Kadjar – camera holder
Plastic camera holder for Renault Kadjar. Designed to securely mount the vehicle camera in its original position, ensuring proper alignment and preventing movement or vibrations while driving.
Specifications
| Compatible with | Renault Kadjar |
|---|---|
| What it does | Camera holder – keeps the camera in its factory position and viewing angle |
| Features | Geometry, fitting dimensions and mounting points as the original; protection against shifting and vibration |
| How it is made | Measured from the camera housing, accurate 3D model, 3D printed |
| Reorder | Kept on file – a copy can be ordered without new modelling |
What we did
- CAD reconstruction
- Final part
- For
- Renault Kadjar
- Category
- Automotive
The 3D model is ready to print
We modelled this part from scratch from the customer’s sample. The model stays with us, so a copy can be printed at any time – without the modelling stage, which makes it faster and cheaper than a new job. If needed, we adapt the dimensions or the material.
Order a copy →We reply within 24 h. Send photos and sizes – we tell you for free if it can be done.
How we did it
-
Original part
We measured the camera housing: main dimensions, seats and structural features.
-
CAD / reverse engineering
We created an exact 3D model of the part.
-
Final printed part
We printed the new holder, identical to the original.
What we changed and improved
The camera installs correctly in its original place.
Similar projects
All projects →New
NewBody & lights
Geely Coolray (SX11) – parking sensor bracket
We made the front parking sensor bracket: a 3D scan of the original part, a prepared model and a new print that matches the mounting dimensions.
0
NewBody & lights
Lexus RX / Toyota Harrier – front air deflector
Fitted in front of the front wheel, it guides the airflow and keeps off spray and dirt. We rebuilt the damaged part with 3D modelling and 3D printing.
0
NewCameras & car electronics
Renault – Extended Grip unit housing (CAN bus)
A new housing (V2) for the Extended Grip unit on a Renault, connected to the CAN bus. It follows the original wiring, so the install looks neat.
8
