NewBody & lights
Geely Coolray (SX11) – right bumper grille
We rebuilt the right front bumper grille by the fog light: a 3D scan, model clean-up and a new 3D-printed part.
1
1 / 4
Car interior
Voyah – boot trim plug
Left boot trim plug for a Voyah, mirrored from the right-hand part. It covers the service opening in the trim in place of the lost original.
Specifications
| Compatible with | Voyah, boot trim, left side |
|---|---|
| What it does | Covers the service opening in the trim in place of the lost plug |
| Features | Made from the right-hand part: centre section turned 180°, side features kept in place |
| How it is made | CAD reconstruction, 3D printed |
| Reorder | Kept on file – a copy can be ordered without new modelling |
What we did
- CAD reconstruction
- Final part
- For
- Voyah
- Category
- Automotive
The 3D model is ready to print
We modelled this part from scratch from the customer’s sample. The model stays with us, so a copy can be printed at any time – without the modelling stage, which makes it faster and cheaper than a new job. If needed, we adapt the dimensions or the material.
Order a copy →We reply within 24 h. Send photos and sizes – we tell you for free if it can be done.
What we changed and improved
The left part, modelled from the right one and printed stronger than the original.
Similar projects
All projects →New
NewBody & lights
Geely Coolray (SX11) – parking sensor bracket
We made the front parking sensor bracket: a 3D scan of the original part, a prepared model and a new print that matches the mounting dimensions.
0
NewBody & lights
Lexus RX / Toyota Harrier – front air deflector
Fitted in front of the front wheel, it guides the airflow and keeps off spray and dirt. We rebuilt the damaged part with 3D modelling and 3D printing.
0
NewCameras & car electronics
Renault – Extended Grip unit housing (CAN bus)
A new housing (V2) for the Extended Grip unit on a Renault, connected to the CAN bus. It follows the original wiring, so the install looks neat.
8
