NewBody & lights
Geely Coolray (SX11) – right bumper grille
We rebuilt the right front bumper grille by the fog light: a 3D scan, model clean-up and a new 3D-printed part.
1
1 / 3
Body & lights
Ford Tourneo Custom – mirror indicator frame
The indicator frame in the side mirror, replacing a broken or damaged factory one. It holds the indicator firmly in place, so the whole mirror does not need replacing. Made to the mirror geometry and the original fixing points.
Specifications
| Compatibility | Ford Tourneo Custom |
|---|---|
| Function | Holds the indicator in the side mirror |
| Manufacturing | To the mirror geometry and factory fixing points |
| To order | The original part or photos with dimensions |
What we did
- CAD reconstruction
- Final part
- Category
- Automotive
The 3D model is ready to print
We modelled this part from scratch from the customer’s sample. The model stays with us, so a copy can be printed at any time – without the modelling stage, which makes it faster and cheaper than a new job. If needed, we adapt the dimensions or the material.
Order a copy →We reply within 24 h. Send photos and sizes – we tell you for free if it can be done.
Similar projects
All projects →New
NewBody & lights
Geely Coolray (SX11) – parking sensor bracket
We made the front parking sensor bracket: a 3D scan of the original part, a prepared model and a new print that matches the mounting dimensions.
0
NewBody & lights
Lexus RX / Toyota Harrier – front air deflector
Fitted in front of the front wheel, it guides the airflow and keeps off spray and dirt. We rebuilt the damaged part with 3D modelling and 3D printing.
0
NewCameras & car electronics
Renault – Extended Grip unit housing (CAN bus)
A new housing (V2) for the Extended Grip unit on a Renault, connected to the CAN bus. It follows the original wiring, so the install looks neat.
8
