NewBody & lights
Geely Coolray (SX11) – right bumper grille
We rebuilt the right front bumper grille by the fog light: a 3D scan, model clean-up and a new 3D-printed part.
1
Home Projects
Our projects
From a broken part to a new look – we rewrite the story of things.
Real parts, real problems solved. From car and industrial components to parts for homes and machines – rebuilt with measuring, scanning, CAD and 3D printing.
- Real modelsfrom real cases
- Practical solutionsfor many fields
- 3D printingstrong materials
New
NewFurniture & renovation
Snap-fit mini skirting
We designed and printed a mini skirting that hides parts of the door construction. The clip is shaped for the aluminium profile: press it on until it clicks – no glue, no screws. The design follows the profile shape and the right press fit.
2
NewHome appliances
Double gear for a food slicer
We made the double gear for the slicing mechanism of a bread and food slicer: rebuilt the geometry of the original, created a 3D model and printed the replacement.
2
NewBody & lights
Lexus RX / Toyota Harrier – front air deflector
Fitted in front of the front wheel, it guides the airflow and keeps off spray and dirt. We rebuilt the damaged part with 3D modelling and 3D printing.
0
NewBody & lights
Geely Coolray (SX11) – parking sensor bracket
We made the front parking sensor bracket: a 3D scan of the original part, a prepared model and a new print that matches the mounting dimensions.
0
TrendingNewCameras & car electronics
Renault – Extended Grip unit housing (CAN bus)
A new housing (V2) for the Extended Grip unit on a Renault, connected to the CAN bus. It follows the original wiring, so the install looks neat.
8
Other engineering work
Roller stamp with your logo
A roller stamp with your own logo: roll it over paper, cardboard or packaging and the logo repeats. Print width – 30 mm.
16
Flagpole mount
A wall bracket and a ring clamp for a flagpole, made to hold under constant wind: two halves on screws, stiffening ribs.
6
Cutter unit for a sterilization pouch sealer
A rebuilt sliding cutter unit for a sterilization pouch sealer: T-handle, pressure spring and a replaceable triangular blade.
11
Body & lights
Ford Tourneo Custom – mirror indicator frame
The indicator frame in the side mirror, replacing a broken or damaged factory one. It holds the indicator firmly in place, so the whole mirror does not need replacing. Made to the mirror geometry and the original fixing points.
13
Body & lights
Mercedes-Benz Viano / Vito W639 – sill trim bracket
The front left sill trim bracket, replacing a broken factory one. It holds the trim in place – no need to buy a new original part. Made from the sample, keeping the shape, dimensions and fixing points.
10
Car interior
VW Tiguan – seat belt buckle button mechanism
The plastic part of the VW Tiguan seat belt buckle button. It is not sold separately – only together with the whole buckle. It follows the original shape and works with the factory spring, restoring normal buckle release.
9
Gears & gearboxes
Linear actuator gear
Plastic gear for the lead screw of an electric linear actuator. It transfers rotation from the motor to the screw – such units work in adjustable beds, recliners and electric jacks.
20
Body & lights
Porsche Macan – headlight cover
Protective cover for the right LED headlight of the Porsche Macan 95B (2019+ facelift). It keeps dust, moisture and dirt away from the headlight internals and fits in place of the original.
15
Body & lights
Honda Accord – boot closing handle
Plastic handle for the inner boot lid trim of the Honda Accord (part no. 84635-SEA-003ZF). It is used to close the boot lid without touching the outer body.
13
Other engineering work
Platform mounts for retail scales
Plastic mounts for the platform of electronic retail scales. They hold the platform on the body so it sits level and does not shift while weighing.
20
Other engineering work
Nespresso capsule holder
Holder for Nespresso coffee capsules with a reworked top and a lid. It keeps capsules at hand next to the coffee machine – light plastic instead of heavy metal.
17
Most viewedMost saved
Gears & gearboxes
Kids' electric quad bike – gearbox gear
Gearbox gear for a children's electric quad bike, rebuilt from the old part. It transfers rotation from the electric motor to the wheels.
12
Body & lights
Toyota – bumper plugs
Plastic plugs for the factory holes in a Toyota bumper. They close the holes so the bumper looks complete and dirt and water stay out.
16
Body & lights
Bentley – parking sensor mount
Bentley parking sensor mount: inner bracket and retaining ring. It holds the sensor in the bumper at the right angle so the parking system works without errors.
11
Other engineering work
Pushchair – steering mechanism repair
Reinforced three-part steering lever for a child's stroller, bolted together. It turns the wheels – the stroller steers again without replacing the whole unit.
19
Furniture & renovation
Swivel joint for a Jouba mop handle
Swivel joint that the Jouba mop handle attaches to. It connects the handle to the mop head and lets the head turn while cleaning.
9
Furniture & renovation
Concealed wall mount for bathroom accessories
Inner plastic parts of a concealed wall mount (flange) for towel holders, rails and shelves in the bathroom. The mounting plate is fixed to the wall and the decorative cover hides the screws.
7
Gears & gearboxes
Opel Vectra – boot lock repair
New gear and improved mechanism for the Opel Vectra electric boot-lid closer. It pulls the lid shut and locks it without slamming.
16
Car interior
Voyah – boot trim plug
Left boot trim plug for a Voyah, mirrored from the right-hand part. It covers the service opening in the trim in place of the lost original.
13
Home appliances
Gas stove leg extenders
Leg extenders for a gas stove – 7 cm threaded sleeves. They raise the stove by 5 cm to the height of new kitchen units without altering the original feet.
12
Car interior
Volvo – gear shifter claw
Automatic gear selector claw for the Volvo XC90, XC70, S60, S80 and V70 (P2 / P3 platforms). It holds the selector lever in the chosen position so gear changes stay precise.
14
Equipment & installations
Renault button adapter for a laser table
Laser table adapter for the 7L D3 button from a Renault steering wheel. It holds the button without play so the laser engraves the icon precisely.
11
Furniture & renovation
Inspection hatch cover
Inspection hatch cover made to fit the opening in a wall or boxing. It hides access to pipes, meters and valves and comes off easily for servicing.
12
Car interior
Mercedes-Benz SL (R129) – door pocket mounts
Door pocket mounts for the Mercedes-Benz SL (R129). They hold the pocket on the door panel – a replacement for broken originals that are no longer sold.
13
Car interior
Mercedes-Benz SL (R129) – sun visor mount covers
Plastic covers for the sun visor mounts of the Mercedes-Benz SL (R129). They hide the mount and restore the factory look when the originals are broken or lost.
5
Car interior
Mercedes-Benz SL (R129) – seat belt guides
Seat belt guides for the Mercedes-Benz SL (R129). The belt runs through the guide and stays in the right position – a replacement for broken or lost originals.
5
Cameras & car electronics
Maserati Ghibli – 360° front camera housing
Front camera housing for the 360° surround-view system on the Maserati Ghibli. It follows the bumper and grille shape and holds the camera at 33° without play, so it looks factory-made.
15
Gears & gearboxes
Conveyor drive sprocket for a hinged steel belt
Drive sprocket for a hinged steel belt conveyor. It transfers rotation from the drive shaft to the belt; the tooth length was increased for better engagement.
11
Body & lights
Chevrolet Camaro – front bumper trim
Front bumper trim for the Chevrolet Camaro, recreated from a 3D scan. It forms the sporty front contour and mounts on the factory fixing points.
10
Car interior
Nissan Juke – gear shift mechanism part
Plastic guide for the Nissan Juke gear shift mechanism, made from the original. It keeps the parts on the right path so the lever shifts without play or jamming.
9
Body & lights
Toyota – daytime running light covers
Clear PETG covers for Toyota daytime running lights. They cover the LEDs and let the light through without dark stripes.
7
Gears & gearboxes
CD changer gear – 10 mm, 30 teeth
A 10 mm plastic gear with 30 teeth for a CD changer mechanism. It drives the screw of the optical pickup, so the player reads discs again.
4
Gears & gearboxes
Thickness planer gear
Bevel gear for a thickness planer, rebuilt from the damaged part. It meshes with a second gear at 90° and transfers rotation inside the planer mechanism.
9
Motorcycles
Honda CB650R – heated grip button
Heated grip button housing for the Honda CB650R motorcycle. A white insert lets the indicator light through, so you can see when the heating is on.
6
Car interior
Mercedes-Benz W123 – heater knob and hood strut mounts
Two parts for the Mercedes-Benz W123: the inner part of the heater knob and the bonnet strut mounts. The knob controls the heating again, and the mounts hold the struts that keep the bonnet open.
14
Car interior
Mercedes-Benz W123 – inner door handle insert
Inner door handle insert for the Mercedes-Benz W123, modelled from a scan of the part and the chrome frame. It fits the original frame – the door opens comfortably from inside again.
8
Electronics & gadgets
Thermometer-hygrometer adapter for an AAA battery
Adapter housing for a mini thermometer-hygrometer that takes an AAA battery instead of an AG3. The thermometer runs much longer on one battery, and the display stays in place.
8
Equipment & installations
Venturi injector
Parts for a Venturi injector in water treatment systems. The injector draws air into the water – needed for aeration, iron removal and degassing.
6
Farm & garden
DAEWOO DAT 2021Li – cultivator gearbox gear
Gearbox gear for the DAEWOO DAT 2021Li cultivator, rebuilt from the original – teeth, splines, ribs and fitting dimensions. It transfers rotation from the motor to the tilling blades.
9
Equipment & installations
Gate barrier – limit switch cam
Limit switch cam for a gate barrier drive, with a metal bushing and a play-free fit on the shaft. It presses the limit switch that stops the barrier arm at the top and bottom.
8
Gears & gearboxes
Makita – rear gearbox housing for a drill driver
Rear part of the gearbox housing for a Makita drill-driver. The first-speed gears run in it – when it wears, first speed stops working while second still does.
9
Electronics & gadgets
Sony WH-1000XM5 / XM6 – headphone hinge repair
New hinge support for Sony WH-1000XM5 / XM6 headphones, replacing the cracked plastic one. It connects the ear cup to the headband and takes the load when folding and putting them on.
12
Body & lights
BMW E63 / E64 – reverse engineering of OEM parts
Plastic parts for the BMW 6 Series E63 / E64, built from scratch: fog light trim, headlight washer cap and side bumper trims. They replace broken or lost originals that are hard to find.
8
Furniture & renovation
Concealed tile ventilation grille
Concealed tile ventilation grille with a removable magnetic panel. It provides extraction in a bathroom, shower or toilet while only the tiles are visible.
11
Hobby & airsoft
Airsoft pistol piston ZM19
Piston for the ZM19 airsoft pistol (a Colt M1911 replica), true to the original size. It builds the air pressure for each shot – the new piston restores compression.
8
Home appliances
Ice maker repair in one day
Ice crusher impeller for an ice maker, rebuilt from scratch in a day. It crushes the ice in the crusher – the machine works again without replacing the whole unit.
7
Motorhomes & camping
Motorhome hatch lock
Hatch lock for a motorhome – a part no longer sold, redesigned and made new. It locks the hatch securely so it doesn't open while driving.
11
Car interior
Škoda Kodiaq – steering column stopper
Steering column adjustment stopper for the Škoda Kodiaq. It locks the steering wheel at the chosen height and reach – without replacing the whole column mechanism.
5
Motorhomes & camping
Corner awning cover for a motorhome
Corner cover for a motorhome awning housing, about 25 cm, in white plastic resistant to sun and heat. It closes the corner of the housing and protects the awning mechanism from dirt and moisture.
10
Furniture & renovation
Furniture roller mechanism carriage
Carriage for a furniture roller mechanism, designed from a sample and measurements. It carries the rollers that a sliding door or drawer runs on – the mechanism moves smoothly again.
7
Cameras & car electronics
Renault Kadjar – camera holder
Plastic camera holder for Renault Kadjar. Designed to securely mount the vehicle camera in its original position, ensuring proper alignment and preventing movement or vibrations while driving.
8
Farm & garden
Seed drill rotor
Seed metering rotor for a seed drill, made from the original with a reinforced inner profile. It meters the seeds and feeds them evenly into the furrow.
5
No matching projects. Try another filter.
What we can print
How big we can print
A part up to 35 cm is printed in one piece. Larger objects are split into parts and assembled.
Will the part fit?
Send the part dimensions
Printed in one pieceToo big for one piece – split into parts: 2
Chamber heated up to 65 °CLarge ABS, ASA and PC parts do not warp
Nozzle up to 350 °CEngineering plastics: PC, PA (nylon), carbon and glass fibre filled
Bed up to 120 °CThe first layer holds firmly – accurate dimensions
Two nozzlesTwo colours or two materials in one part
350×320×325mmBuild volume