See it first
First we show you what the part will look like
Before printing, you see the 3D model and can check the shape and main details.
3D Scanning · 3D Design · 3D Printing
We rebuild parts, develop prototypes, and create components from real geometry.
We can start from the original part, the installation area, a sketch, or the available dimensions. If the shape is complex, we scan it, rebuild the model, print a test piece, and check the fit before the final version.
See how we work
Recent automotive project
360° camera housing for a Maserati Ghibli, built from the real bumper geometry.
We captured the mounting geometry, set the camera angle to 33°, and hid the fastening system. A dedicated adapter was also designed for installation.
3D scanning for complex shapes
We use scanning when a few measurements are not enough — for curved surfaces, contact areas, and irregular geometry.
3D modeling with the installation in mind
We define wall thicknesses, holes, clearances, and mounting points around the real assembly so the part fits where it should.
Printing, checking, and delivery on time
The job does not end with the 3D model. We print the part, check it, and prepare the final version for the agreed deadline.
Explore
See what we made – and order the same
47
Finished projects
Rebuilt parts, prototypes and installation
47 real jobs for clients – from the broken part to the installed one, with real photos.
See the projects
94
Catalog
Order a part, a mechanism or a gift
94 products: car and household parts, gears, decor and figurines. Nothing to pay on the site.
Open the catalog
From the real part to the finished result
Need 3D scanning, 3D modeling, or 3D printing? We can handle the whole project — from the original part to the finished piece.
We can work from a part, photo, sketch, or dimensions. When needed, we scan it, rebuild the model, print a test version, and check it before delivery.
Checked before printing
A successful part is decided long before the printer starts.
Before printing, we check the things that matter during installation: holes, wall thicknesses, clearances, mounts, and contact areas.
01
It needs to fitWe check the shape and contact areas before spending time and material.
02
The mounting points need to line upHoles, clips, and mounts are made for the real assembly, not just for a good-looking model on screen.
03
Less reworkProblems that show up in the model are much easier to fix before the first print.
Before printing
First you see the part in 3D. Then we agree on any changes and the quantity.
You get a link to the 3D model and can rotate it directly in your browser. Before printing, you can ask us to change the shape, dimensions, holes, or mounts. Once you approve it, we print one part or the quantity you need.
Open the modelRotate it in 360° and see exactly what will be printed.
Request changesTell us which dimension, hole, mount, or shape should be changed.
Choose the quantityAfter approval, we print one piece or the number of parts you need.
You can change it
Tell us what you want changed
If something is not right, we can change the shape, dimensions, or individual features before printing.
Check together
We check how the part will fit before printing
Before the final print, we can check its position and fit where it will actually be installed.
Check dimensions
We verify the important dimensions before printing
Holes, mounting points, and contact areas are checked before the final version.
After approval
We print the quantity you need
Once you approve the model, you can order one part or the number of copies you need.
From an idea to your own product
Planning a New Product or Expanding Your Business into a New Area?
We can develop the product with you, from a small component to a complex assembly. We start with the idea, dimensions, shape, or existing parts and work toward a version that can be tested.
Message us on WhatsApp
Solutions for equipment and machinery
If the part does not exist, we design one for the job.
Housings, adapters, mounts, mechanisms, and small batches — designed around the existing assembly and how the part will actually be used.
01
Housing built around an existing connector
Dimensions and fit are tied to the real assembly, where even a small clearance can affect installation.
View project
02
Complex geometry in a single part
When conventional geometry is not enough, we can build forms that make sense specifically for additive manufacturing.
View project
03
A part that is no longer sold separately
We rebuild the damaged component while preserving the mounting points of the original assembly.
View project
04
Adapters and connections
Designed around the dimensions of the existing system — water, air, electronics, or mechanics.
View project
05
Mounts designed for the real installation point
We account for available space, access, fastening, and how the part needs to be installed or removed.
View project
06
Small batches after the first part is verified
We verify the first part, then repeat the same geometry and parameters for additional copies.
View projectYou do not need to know the technical name of the part. Show us the problem, the part itself, or where it needs to fit.
Discuss the project
Our Works
Find a similar project among our work.
Choose the situation that sounds familiar: protect electronics, rebuild a mechanism, make a mount, replace a car part, or create a 3D model. This makes it easier to see what we can help with.
Need to connect components
Adapters, caps, and threaded parts
Made from the original or dimensions when the required shape, thread, or connection is no longer available.
Examples
Need a non-standard part
Non-standard parts for a specific function
When no standard solution fits, we develop the part around the actual task and operating conditions.
Examples
Need to scan a part
3D scanning and production preparation
We capture the geometry of an existing part for reconstruction, dimensional checks, or further production.
Examples
Figurines & custom objects
Collectible figures and models.
Figurines, personalized gifts, decor, and collectible pieces — made in the size, color, and finish that suit the project.
Modular characters, ready to assemble
Each figure comes as separately printed parts — head, hair, outfit, accessories — that you snap together yourself, like a kit, no glue or painting needed.
See the project on Telegram →
From idea to 3D figurine
We start from an idea, drawing, or visual reference and turn it into a figurine ready for printing and finishing.
See the project on Telegram →
Decor with a story
Decorative pieces designed to also be functional — here, a bunny turned into a basket with a handle.
See the project on Telegram →
Series & collectible sets
Characters printed in small runs, each in its own color — for full collections or group gifts.
See the project on Telegram →
Gifts for car enthusiasts
Custom minifigures with logos and colors matching your favorite car brand.
See the project on Telegram →
Large figurines for displays and themed spaces
We also make larger figurines for displays, themed areas, kids’ rooms, and photo zones.
See the project on Telegram →
Personalized names & initials, made to order
From initial coasters to name badges — custom pieces printed to order for your desk, events or gifts.
See the project on Telegram →
Large-scale figures — up to 45 cm
For collectible projects we also build large-scale pieces with accessories and mechanisms assembled from several separately printed parts.
See the project on Telegram →
Original design, however bold
We combine references, sketches or unusual ideas into a fully original character, printed and finished from scratch.
See the project on Telegram →
Fridge magnets, with layered characters
Several characters layered together, printed as a single fridge magnet — a small gift with a lot of personality.
See the project on Telegram →
Characters from the same story, as a set
Several characters from the same universe, each with its own colors and expression — printed and painted to match the original as closely as possible.
See the project on Telegram →
Fine detail, down to facial expression
Glasses, eyelashes, expressions — at small scale every detail matters so the character is recognized instantly.
See the project on Telegram →
Fully original characters from your idea
A character invented from scratch — outfit, accessories, expression — turned into a complete figurine, ready for painting.
See the project on Telegram →
Boxes and objects with your own brand
Custom packaging and objects with an engraved logo and text — suited to small brands, salons or events.
See the project on Telegram →
Seasonal decor with personality
A little tree with legs and a star — holiday decor meant to bring a smile, not just sit on a table.
See the project on Telegram →
Surface after printing
The printed surface is part of the result.
3D printing leaves a visible layer pattern. How noticeable it is depends on layer height, orientation, material, and geometry. We choose the settings based on the part and the finish you want.
Layer height
Affects how visible the layer lines are and the level of detail.
Orientation
Changes the surface pattern and the appearance of specific areas of the part.
Material
Can change the sheen, color, and feel of the surface.
On complex geometry, the direction of the layers becomes especially visible.
On dark parts, light makes changes in texture and print angle easier to see.
Decor & gifts
For the home, office, or a personalized gift.
Planters, name plaques, keychains, boxes, and other objects that can be adapted in shape, color, and size.
Planters printed in one piece
A raised pattern, printed as a single piece with no seams — perfect for small indoor plants.
See the project on Telegram →
Same shape, your color
Any design can be printed in any of our filament colors, to match your interior exactly.
See the project on Telegram →
Names & personal messages
Characters and props made specially for the occasion, with the text or name of your choice — a quick gift that's always appreciated.
See the project on Telegram →
Light objects
The right filament lets light pass beautifully through thin walls, turning a simple lamp into a decorative object.
See the project on Telegram →
NFC keychains, with a built-in chip
A keychain hiding an NFC chip: tap a phone against it and the client instantly gets your contact, menu or profile — no app, no QR code.
See the project on Telegram →
Packaging that's part of the gift
Even the box can be printed — shape, texture and color designed to make any gift feel special.
See the project on Telegram →
Before handover
We pack every model with the same care we put into making it.
We choose the packaging around the shape and size of the item so it stays protected until it reaches the client.
Protection
The item is secured so it does not move unnecessarily inside the box.
Presentation
For gifts, the packaging can be prepared ready for handover.
Matched to the shape
We choose the box size and type around the specific model.
Showcase
What else can be printed? Much more than you might think.
The carousel includes a mix of projects — technical parts, figurines, organizers, and decorative pieces.
Gears and mechanical parts, printed to tight tolerances.
Seasonal decor with character — any idea can take shape.
Full figures, head to hooves — nothing left out of frame.
Repairs and spare parts for fine mechanisms, carefully disassembled.
Characters with attitude — any idea can become a figure.
From 3D scan to finished part — the whole process, under control.
Packaging and boxes in custom shapes and prints.
Useful desk objects, with their own geometric design.
Фигурки супергероев и персонажей можно печатать в нужном размере и цвете.
Подвижные игрушки и фигурки приятно держать в руке и удобно дарить.
Сувениры и сезонные серии с текстом, символикой или персональным сообщением.
Тематические коробки и функциональные контейнеры тоже можно печатать на заказ.
Крупный декор — вазы и интерьерные объекты — печатаем даже в большом размере.
Шарнирные фигурки и декоративные формы хорошо подходят для небольших серий.
Коллекционные персонажи и фигурки можно делать по модели или по визуальному референсу.
Лотки, органайзеры и брендированные элементы делаем под конкретную задачу.
Практичные крепления и держатели для дома, гаража или офиса.
Materials & colors
We choose the material and color for your part.
We choose the material based on how the part will be used and the color based on the look you want. If you need a specific shade, send us a reference and we will check the available options.
You can send a photo, a color reference, or a Pantone / HEX code.
Quick enquiry
Share a few details with us.
Send us a few photos, dimensions, or a short description. This helps us understand what needs to be done.
01Fill in the basic details.
02Add photos from several angles.
03We will reply after reviewing your request.
Contact
Tell us how we can help.
Send us photos, dimensions, a sketch, or the original part. We will look at what can be done and agree on the details before we start.