Home Projects Gears & gearboxes
Conveyor drive sprocket for a hinged steel belt 1 / 4
Gears & gearboxes

Conveyor drive sprocket for a hinged steel belt

The sprocket transmits rotation from the drive shaft to the belt. The teeth were lengthened for better engagement.

What we did
  1. 3D scanning
  2. CAD reconstruction
  3. Prototype
  4. Final part
For
Transportor cu bandă din oțel
The 3D model is ready to print

We modelled this part from scratch from the customer’s sample. The model stays with us, so a copy can be printed at any time – without the modelling stage, which makes it faster and cheaper than a new job. If needed, we adapt the dimensions or the material.

Order a copy →
Request a similar part View on Telegram ↗

We reply within 24 h. Send photos and sizes – we tell you for free if it can be done.

How we did it

  1. 3D scanning

    Measurements, 3D scanning and data preparation.

  2. CAD / reverse engineering

    CAD modelling and print preparation.

  3. Test versions

    First prototype compared with the original, then the first full-size version and another check.

  4. Final printed part

    Printing the final batch.

What we changed and improved

Longer working tooth length – the mechanism runs more steadily.

Similar projects

All projects →
Linear actuator gearNew
Gears & gearboxes

Linear actuator gear

A plastic gear for the lead screw assembly of an electric actuator.

6