Furniture & renovation
Test parts and failed attempts
Some of the test parts left over from our projects.
4
1 / 4
Motorhomes & camping
Corner awning cover for a motorhome
The cover closes the corner of the awning and protects the mechanism from dirt and moisture.
What we did
- CAD reconstruction
- Final part
- For
- Copertină autorulotă
- Category
- Home & Furniture
The 3D model is ready to print
We modelled this part from scratch from the customer’s sample. The model stays with us, so a copy can be printed at any time – without the modelling stage, which makes it faster and cheaper than a new job. If needed, we adapt the dimensions or the material.
Order a copy →We reply within 24 h. Send photos and sizes – we tell you for free if it can be done.
The problem / original part
Requirements: about 25 cm, a strong outdoor material resistant to sun and rain, up to 100 °C, white with no painting.
How we did it
-
CAD / reverse engineering
Not a single flat surface, and the curves change along the whole length.
Similar projects
All projects →
Home appliances
Gas stove leg extenders
The stove was raised by 5 cm to match new furniture without altering the original legs.
2
Furniture & renovation
Inspection hatch cover
An inspection hatch cover adapted to the size of the wall or box.
1
Furniture & renovation
Concealed tile ventilation grille
A grille with a removable magnetic panel for a bathroom, shower or toilet – the interior stays clean.
1