NewOther engineering work
Roller stamp with your logo
A roller stamp with your own logo: roll it over paper, cardboard or packaging and the logo repeats. Print width – 30 mm.
12
1 / 8
New
Flagpole mount
A wall bracket and a ring clamp for a flagpole, made to hold under constant wind: two halves on screws, stiffening ribs.
- For
- Flagpole
We reply within 24 h. Send photos and sizes – we tell you for free if it can be done.
Specifications
The flagpole mount had to withstand strong, constant wind without loosening. The old parts did not keep the joint rigid enough.
What we changed and improved
A mounting set for a flagpole: the wall bracket clamps the tube with two halves and screws, and the ring clamp holds the pole higher up. The main job of the design is to hold the flagpole securely and keep the joint rigid under constant wind loads.
Stiffening ribs and hex pockets for the nuts keep the screws from working loose over time. We make it from the old part or from measurements, for your tube diameter.
| Type | Bracket and clamp for holding a flagpole |
|---|---|
| Purpose | Holds the pole firmly and keeps the joint rigid under constant wind |
| Design | Two halves clamped with screws, stiffening ribs, hex pockets for nuts |
| Mounting | On a wall or a post; ring clamp for the tube |
| How we make it | From the original part or from measurements |
Available in the catalog
Similar projects
All projects →New
NewCutter unit for a sterilization pouch sealer
A rebuilt sliding cutter unit for a sterilization pouch sealer: T-handle, pressure spring and a replaceable triangular blade.
9
Body & lights
Ford Tourneo Custom – mirror indicator frame
The indicator frame in the side mirror, replacing a broken or damaged factory one. It holds the indicator firmly in place, so the whole mirror does not need replacing. Made to the mirror geometry and the original fixing points.
9
Body & lights
Mercedes-Benz Viano / Vito W639 – sill trim bracket
The front left sill trim bracket, replacing a broken factory one. It holds the trim in place – no need to buy a new original part. Made from the sample, keeping the shape, dimensions and fixing points.
7
