NewOther engineering work
Roller stamp with your logo
A roller stamp with your own logo: roll it over paper, cardboard or packaging and the logo repeats. Print width – 30 mm.
12
1 / 2
New
Cutter unit for a sterilization pouch sealer
A rebuilt sliding cutter unit for a sterilization pouch sealer: T-handle, pressure spring and a replaceable triangular blade.
- For
- Sterilisation pouch roll sealer
We reply within 24 h. Send photos and sizes – we tell you for free if it can be done.
Specifications
On a roll sealer for sterilization pouches the cutter unit was worn: pouches no longer cut straight off the roll. The original part was not sold separately.
What we changed and improved
A sliding cutter unit for a roll sealer of sterilization pouches. The T-shaped handle sits in the track on top of the machine: slide it sideways and the sealed pouch is cut straight off the roll. The spring inside keeps the blade pressed evenly, and the triangular blade, fixed with a screw, cuts kraft pouches and rolls of any thickness in both directions.
We make it from the old part or from photos and sizes, and the blade is easy to replace when it gets dull.
| Type | Sliding cutter unit with a replaceable blade |
|---|---|
| For | Roll sealers for sterilization pouches (dental, medical) |
| Mechanism | A spring keeps the blade pressed evenly on the guide |
| Blade | Triangular, fixed with a screw, cuts both ways |
| Handle | T-shaped with a non-slip grip |
Available in the catalog
Similar projects
All projects →New
NewFlagpole mount
A wall bracket and a ring clamp for a flagpole, made to hold under constant wind: two halves on screws, stiffening ribs.
6
Body & lights
Ford Tourneo Custom – mirror indicator frame
The indicator frame in the side mirror, replacing a broken or damaged factory one. It holds the indicator firmly in place, so the whole mirror does not need replacing. Made to the mirror geometry and the original fixing points.
9
Body & lights
Mercedes-Benz Viano / Vito W639 – sill trim bracket
The front left sill trim bracket, replacing a broken factory one. It holds the trim in place – no need to buy a new original part. Made from the sample, keeping the shape, dimensions and fixing points.
7